Go Power! 30A Dual Bank MPPT Solar Controller + Bluetooth Remote Display Kit | 12V & 24V | RV-C

Dual Bank 30A MPPT Solar Charging With a Display on the Wall and an App in Your Pocket

This kit pairs the Go Power! GP-RVC-30-MPPT dual bank solar charge controller with the GP-RVC-R Bluetooth-enabled remote display — a complete, monitored 30-amp solar charging system in one box. The controller has two battery outputs: it charges the house bank first, then sends surplus solar to the chassis or starting battery once the house bank finishes absorption, so a motorhome keeps both banks up from one controller with no separate trickle charger. Mount the controller near the batteries, run the included 25 ft cable to the remote inside the coach, and read battery voltage and charge current at a glance — or open the Go Power! Connect app on your phone.

Supports 12V and 24V systems and up to 600W of solar at 12V (1,200W at 24V), with native RV-C integration. This is a controller-and-monitoring kit; solar panels, batteries and wiring are not included.

What's in the Box

• GP-RVC-30-MPPT 30A dual bank MPPT solar charge controller (12V/24V)
• GP-RVC-R Bluetooth-enabled remote display with 25 ft communication cable

Compatibility

Single-bank trailers and vans work too — use BAT1 only. Already have a GP-RVC-R remote or a PowerTrak display installed? You only need the controller on its own. Confirm battery chemistry, array voltage and power, wiring and protection requirements against the installation manual before connecting.

Certification and Sale Restrictions

This controller is not UL listed. It is sold for aftermarket and do-it-yourself installation in the United States only and is not intended for OEM production use. Not available for shipment to Canada.

Key Features

• 30A MPPT charging — up to 98% conversion efficiency
• Dual battery outputs (BAT1 / BAT2) — house bank gets priority, chassis battery is topped up with surplus
• 12V and 24V battery systems; up to 600W PV at 12V, 1,200W at 24V
• Bluetooth monitoring through the Go Power! Connect app (via the included remote)
• Surface-mounted remote shows battery voltage, charge current, total charge/discharge and min/max voltage — no external power supply needed
• RV-C network integration with RS485 and CANbus communication
• Supports GEL, AGM, Flooded, LiFePO4 and Custom battery profiles
• Ultra-low 8mA quiescent draw; IP30 rated for compartment installation
• Stackable — add controllers to expand your array
• 5-year warranty

• Length: 7.77 in
• Width: 5.71 in
• Height: 3.37 in
• Weight: 3.14 lb