PRODUCT DETAILS
Compact 10A MPPT Solar Charging With Bluetooth Monitoring Built In
This kit pairs the Go Power! GP-RVC-MPPT-10 solar charge controller with the GP-RVC-R Bluetooth-enabled remote display — a complete, monitored solar charging system for 12V setups up to 150W. Mount the controller near the battery, run the included 25 ft cable to the remote inside the van or trailer, and read battery voltage and charge current at a glance or in the Go Power! Connect app on your phone.
Ideal for a single 100W–150W panel on a camper van, truck camper, teardrop or small travel trailer, or for keeping a stored RV's house battery topped up. This is a controller-and-monitoring kit; solar panels, batteries and wiring are not included.
What's in the Box
- GP-RVC-MPPT-10 10A MPPT solar charge controller (12V)
- GP-RVC-R Bluetooth-enabled remote display with 25 ft communication cable
Compatibility
Already have a GP-RVC-R remote installed? You only need the controller on its own. Planning more than 150W, a 24V system or two battery banks? Step up to the 30A Dual Bank MPPT + Bluetooth Remote Kit. Confirm array and battery requirements against the installation manual before connecting.
Certification and Sale Restrictions
This controller is not UL listed. It is sold for aftermarket and do-it-yourself installation in the United States only and is not intended for OEM production use. Not available for shipment to Canada.
FEATURES
Key Features
- 10A MPPT charging — up to 98% conversion efficiency
- 12V battery systems; up to 150W PV input
- Bluetooth monitoring through the Go Power! Connect app (via the included remote)
- Surface-mounted remote shows battery voltage, charge current, total charge/discharge and min/max voltage — no external power supply needed
- RV-C integration with RS485 communication
- Supports GEL, AGM, Flooded, LiFePO4 and Custom battery profiles
- Low 8mA quiescent draw; IP30 rated for compartment installation
- Stackable — add controllers to expand your array
- 5-year warranty
SPECIFICATIONS
- Length:
- Width:
- Height:
- Weight:
| Kit Contents | GP-RVC-MPPT-10 controller + GP-RVC-R remote display with 25 ft cable |
|---|---|
| System Voltage | 12V |
| Rated Charge Current | 10A |
| Max PV Input Power | 150W |
| Max PV Input Voltage | <100V |
| No-load Loss | 8mA |
| Battery Profiles | GEL, AGM, Flooded, LiFePO4, Custom |
| Monitoring | GP-RVC-R remote display (voltage, current, totals, min/max) + Bluetooth via Go Power! Connect app |
| Communication | RS485, RV-C |
| Operation Temperature | -35°C ~ +45°C |
| Controller Dimensions | 6.1 x 3.3 x 1.8 in (155 x 86 x 45.6 mm) |
| Controller Weight | 0.67 lb (300 g) |
| IP Protection | IP30 (controller) |
| Operation Altitude | < 3000 m |
| Certification | Not UL listed — US aftermarket/DIY installation only |
| Warranty | 5 years |
MANUALS, SAFETY INFORMATION AND DOWNLOADS
ACCESSORIES
Go Power! 10A MPPT Solar Controller with RV-C | 12V | GP-RVC-MPPT-10$127.99 USDView$160.00 USD
Go Power! 30A Dual Bank MPPT Solar Controller + Bluetooth Remote Display Kit | 12V & 24V | RV-C$335.98 USDView$420.00 USD
PowerTrak™ Display Extension Harness (25 ft)$43.99 USDView$55.00 USD


